DRE Volta 6 Interior Door
- Free consultation
- Delivery and certified installation in CT & NY
- European quality
DRE Volta 6 Interior Door
Volta 6 presents a largely uninterrupted glazed field with one horizontal division toward the top of the leaf. The short upper section and taller lower area give this DRE model a different proportion from the evenly divided Volta designs. Its restrained arrangement can be considered where a designer wants glass to remain the main visual material and prefers fewer crossbars across the view between rooms. The frame is MDF, with an 80 mm member width, and the leaf is specified as a non-rebated swing type. DRE offers 6 mm laminated glass in clear or milky form. Choosing between them affects the relationship of the connected spaces: a direct view can remain part of the room layout, or the glazing can provide a softer visual boundary. The warm gray finish in the official Volta 6 picture is an example within the DRE-Cell matte range. Review the proposed tone beside the wall and floor finishes so the upper crossbar and the outer frame sit comfortably with the rest of the interior. The top bar can introduce a point of visual interest while leaving the middle of the leaf less divided. In a room with a prominent view into the next space, compare clear and milky samples at the opening before deciding which relationship is appropriate.
A simple division with a vertical emphasis
Because most of the center is glass, the pull becomes an important vertical detail. The manufacturer supplies mounting holes and lists Factor or Nomi as separately purchased pull options. A magnetic lock is also identified in the construction information. Select the pull, lock function and matching frame together, then confirm the opening direction in relation to furniture and circulation on both sides. The upper division can be used as a visual reference when comparing this model with nearby glazed openings, without assuming it must align with a window or transom. DRE does not allow the leaf to be shortened. Establish the finished floor level and check the actual opening dimensions before placing the order so the intended proportions are maintained. The final specification should identify Volta 6, the glass type, matte surface and required hardware rather than relying solely on a photograph. With those choices coordinated, the door offers a clearly defined interior design built around a tall glazed field, an upper horizontal bar and the clean edge of a non-rebated swing leaf. A tall pull may visually relate to the long lower glass section, while its exact size and placement must follow the compatible component specification. Check the manufacturer reference from the approach to the doorway and from inside the room, keeping the desired view, available wall space and adjacent furniture in the same design discussion.
| Manufacturer and design | DRE Volta 6 |
|---|---|
| Application | Interior use within a dwelling or premises |
| Illustrated design | Single horizontal bar near the upper part of the glazed leaf |
| Swing leaf | Non-rebated |
| Frame material | MDF |
| Frame member width | 80 mm |
| Glazing | 6 mm laminated glass; clear or milky |
| Surface finish | DRE-Cell; matte colors |
| Closing hardware | Magnetic lock |
| Pull handle | Factor or Nomi; purchased separately |
| Leaf modification | Shortening is not permitted |
Reviews
Not sure this is the right solution for your home? Talk to our specialist.
Recently Viewed
Leave your details and our consultant will contact you within one business day.