loader

DRE Volta 7 Interior Door

Price: $ 1,500

  • Free consultation
  • Delivery and certified installation in CT & NY
  • European quality

DRE Volta 7 Interior Door

DRE Volta 7 places a single horizontal bar low on its glazed leaf, leaving a tall glass field above it. This makes the model visually different from Volta 6, whose division is near the top, while retaining the same collection's clearly framed appearance. The low crossbar can be considered when the design of a room calls for fewer lines across the central view through the doorway. An MDF frame with 80 mm members surrounds the glass, and the leaf is a non-rebated swing type. The manufacturer specifies 6 mm laminated glass and lists clear or milky alternatives. A clear presentation keeps adjoining spaces more visually connected, while a milky surface changes the view through the opening. Select the glass with the actual use of the rooms in mind and view a sample under the planned lighting. In the official warm gray image, the tall upper area gives the door a vertical emphasis despite the horizontal detail near its base. The matte DRE-Cell range provides other tones, allowing the frame to be coordinated with a quiet interior palette or made more distinct against the surrounding wall. The model number should remain part of that selection so its lower-bar layout is retained. The lower crossbar can be compared with adjacent baseboard and furniture heights during the design review, keeping the tall upper pane as the main glazed feature.

A tall upper glass field

The hardware should be considered as part of the same composition. DRE identifies a magnetic lock and provides holes for a pull handle, with Factor and Nomi offered as separately purchased choices. A pull can provide a strong vertical line alongside the large upper glazed field, but the component must be compatible with the prepared leaf and selected frame. Confirm handing, opening clearance and lock function before completing the specification. The door may be approached from a hallway or from a furnished room, and considering both views helps establish how the low bar and pull relate to the surrounding space. DRE states that the leaf cannot be shortened, so the final floor level and installation measurements need to be available before dimensions are agreed. For a coordinated group of doors, keep a simple schedule showing the model, glass and matte surface at each location rather than describing every opening only as a Volta door. This helps distinguish the low-bar Volta 7 from other designs when several rooms are involved. The reference image illustrates the numbered pattern in one color; the matching frame, selected glazing and separate pull complete the individual interior specification.

Manufacturer and designDRE Volta 7
ApplicationInterior use within a dwelling or premises
Illustrated designSingle horizontal bar near the lower part of the glazed leaf
Swing leafNon-rebated
Frame materialMDF
Frame member width80 mm
Glazing6 mm laminated glass; clear or milky
Surface finishDRE-Cell; matte colors
Closing hardwareMagnetic lock
Pull handleFactor or Nomi; purchased separately
Leaf modificationShortening is not permitted

Reviews

5 1 review
5 1
4 0
3 0
2 0
1 0
Write a review
Note: HTML is not translated!

Not sure this is the right solution for your home? Talk to our specialist.