Dindecor 6142 Entrance Door

Dindecor 6142 Entrance Door Panel Design

The Dindecor 6142 Entrance Door listing is a decorative-panel design reference for an aluminum entrance, with the manufacturer identifying MODEL 6142 in its Premium Line. Its illustrated combination uses RAL 7016, Satinovo glass, and decorative milling. Together they create a composed facade rather than a plain sheet: the dark gray aluminum field frames the glazed area, while the milled lines add another layer of detail across the panel. Satinovo is the named glass in this model reference, so its softly treated appearance sits between a clear uninterrupted pane and an opaque surface in the overall design. The reverse is described as smooth, giving the interior-facing side a quieter treatment than the milled exterior. A PQ 40×20 pull handle, shown at 1,600 mm, adds a long vertical element alongside the panel’s glazing and surface lines. These are useful details when judging proportions: the glass breaks up the broad panel field, milling gives the aluminum a defined pattern, and the handle introduces a narrow, elongated accent. The seller’s listing confirms the model name but does not specify the exact panel construction or hardware selection, so this manufacturer combination serves as a reference for the design, not a guaranteed complete-door specification.

Satinovo Glass, Milling, and Panel Formats

Consider the 6142 design as a set of choices that affect how the entrance reads from both sides. The placement and size of the Satinovo glass determine where the eye meets the glazed area; the surrounding milling gives that area a frame within the larger aluminum face. A smooth inner face offers a simpler view from indoors, while the patterned front can be coordinated with exterior trim and other facade lines. Dindecor lists insert, single-sided overlay, and double-sided overlay constructions for the panel. In the insert format, the supporting door profile remains visible on each side. A single-sided overlay adds an aluminum skin on the exterior, and a double-sided overlay covers both faces. This selection changes the panel-to-profile relationship and how much of the decorative panel surface is seen from inside. The referenced PQ 40×20 pull handle is a long-format detail that can be compared with the glass and milling proportions; its presence on the manufacturer page does not by itself identify the hardware supplied with the seller’s listing. Before choosing, compare the panel drawing with the intended profile, interior view, and handle position, and record the selected filling format with the chosen glass and finish. The specification below describes MODEL 6142 panel references and options, while the finished entrance door depends on its selected assembly.

Manufacturer MODEL 6142 Panel Reference