Dindecor 6144 Entrance Door

Dindecor 6144 Entrance Door Panel Design

The Dindecor 6144 Entrance Door listing refers to an aluminum panel design whose manufacturer illustration centers on a milled herringbone pattern. MODEL 6144 belongs to the Premium Line and is shown in RAL 6003, a green finish that gives the geometric routing a distinct field to work against. The pattern is built from angled lines that meet and repeat, creating a directional surface rather than a scattered ornament. This makes the panel a natural point of focus on an entrance: the repeated geometry can relate to linear facade materials while still giving the door its own recognizable feature. The manufacturer describes a smooth aluminum inner face, creating a clear change of character between the patterned exterior and the simpler reverse. It also notes that the exterior pattern can be repeated on the inner face as a design option. A PQ10 pull handle measuring 800 mm appears in the MODEL 6144 reference, adding a long, slim element that can be considered alongside the larger herringbone field. These details describe the panel design and its listed options; the Europrestige page names 6144 without confirming every illustrated selection. Treat the RAL 6003 color, inner treatment, repeated pattern, and handle as manufacturer references when comparing the intended configuration.

Herringbone Milling and Interior View

The 6144 design can be evaluated from the two approaches to its inner face: smooth aluminum keeps the pattern on the exterior, while repeating the motif carries the geometry through to the inside. That is a visible design choice, particularly where the door can be seen from both sides of an entry. The green RAL 6003 reference and angled milling can be compared with nearby cladding, metalwork, or other straight facade lines; a drawing or surface sample helps judge the pattern scale in its actual setting. The manufacturer lists three panel filling formats: insert, single-sided overlay, and double-sided overlay. An insert leaves the door profile visible on both faces. A single-sided overlay adds an aluminum skin on the outside, and a double-sided overlay covers the profile on both sides. The formats change the way the panel edge meets the supporting profile, as well as how the inside and outside surfaces are presented. The 800 mm PQ10 handle is a model reference that can be judged for proportion against the milled pattern, though the chosen handle should be identified for the actual order. For a clear specification, record whether the inner side stays smooth or repeats the pattern and which filling format is selected. The table summarizes the 6144 panel reference, not a complete door assembly.

Manufacturer MODEL 6144 Panel Reference