DRE Sol 1

DRE Sol 1 uses a milled panel surface and a UV-cured acrylic finish to give an interior door a defined decorative presence. It belongs to the Supreme designer line, with a wood-based frame and solid chipboard filling. The model is listed in 2,043 and 2,300 mm heights, allowing the surface design to be considered for a conventional or taller doorway. Its decoration is formed by milling rather than applied glass or a wood-veneer claim. The chosen painted finish can relate the door to surrounding walls, interior trim, or furniture. Review the pattern at the intended location so it has the desired emphasis within the room instead of becoming a detail selected independently from the rest of the interior.

Before painting, DRE protects the leaf and frame surfaces with a special preparation layer. The acrylic lacquer is then cured using UV technology, forming the factory-painted surface specified for the collection. This finishing process gives the project a painted door selection without requiring the primed leaf treatment used by some other concealed-frame models. The solid chipboard filling and wood-based frame remain the underlying construction. Consider the painted leaf with the matching frame and visible fitting finish, especially where the door sits beside other coated joinery. A consistent frame selection can keep the opening visually coordinated, while the milled face retains the model’s own decorative detail.

The non-rebated hinged version uses recessed Estetic 80 preparation, with two hinge positions for the 2,043 mm height and three for 2,300 mm. A reverse-rebate version is available with the specified Estetic 1821 preparation and corresponding hinge count. Magnetic lock choices include regular-key, bathroom, cylinder, and latch-only arrangements, with fitting colors selected from those listed for the configuration. Sol 1 also supports SPAZIO CD sliding in the 2,043 mm standard. Choose the height and movement before ordering the frame and fittings, because the sliding and hinged assemblies have different requirements. The selected finish, edge arrangement, frame, lock, and handle should all describe the same complete door configuration. For the standard non-rebated arrangement, DRE lists black, white, steel-colored, or gold fittings. The reverse-rebate selection follows its separately listed fitting options.

Specifications: Manufacturer: DRE, Poland; model: Sol 1; collection: Supreme; product type: milled and painted interior panel door. Frame: wood-based board; filling: solid chipboard; surface finish: UV Premium acrylic lacquer over the manufacturer’s preparation layer. Listed heights: 2,043 and 2,300 mm. Hinged arrangements: non-rebated with Estetic 80 preparation or reverse-rebate with specified Estetic 1821 preparation; hinge count follows the chosen height. Sliding option: SPAZIO CD for the 2,043 mm standard. The published starting amount covers the 2,043 mm leaf without frame or handle. Taller heights, alternate opening arrangements, the selected frame and hardware, and any sliding mechanism complete the order separately.