DRE Auri 7 Interior Door
- Free consultation
- Delivery and certified installation in CT & NY
- European quality
DRE Auri 7 Interior Door
DRE Auri 7 keeps most of its leaf paneled and places one narrow glazed strip near the bottom. The position of that line distinguishes it from Auri 6, which carries its glazed accent toward the top. In the manufacturer's image, the broad panel areas remain the main visual feature and the slim lower strip supplies a small contrasting detail. This makes Auri 7 a model to consider when a room needs the appearance of a paneled door with a limited glazed element rather than an extensive glass center. Its construction uses MDF frame members and flat HDF panels, with 4 mm MAT DRE glass listed for the glazed portions. Vertical members measure 160 mm across and 40 mm thick, giving the leaf a defined frame. DRE-Cell and DRE-3D finishes allow the pattern to be coordinated with matte surfaces or wood-inspired interior materials. Compare the actual finish with floor and baseboard samples, since the low glazed detail draws attention to the lower area of the opening. The glass and frame surface should be selected together, using the numbered reference to retain the intended placement of the narrow strip.
A low horizontal detail in a framed door
The operational specification may use a rebated swing edge or a non-rebated swing edge. DRE describes three silver screw-in hinges and a latch lock for the rebated leaf; the non-rebated alternative is prepared for two concealed Estetic 80 hinges supplied with the frame and uses a magnetic lock. The edge type is therefore best agreed alongside the compatible frame and the lock function needed for the room. A published leaf height of 2043 mm does not replace a check of the full opening, width and installation clearances after the floor finish is established. If a sliding arrangement is more suitable, DRE's NS and NT wall-mounted systems are described for appropriate configurations and should be planned as separate systems. The Auri 7 model number is useful in a door schedule because the low strip can otherwise be confused with other restrained Auri patterns when only a collection name is given. Matching the selected surface and visible hardware across several openings can provide continuity, while each numbered image identifies the intended panel design. Review these choices together so the low glazed accent and framed leaf form a considered part of the room.
| Manufacturer and design | DRE Auri 7 |
|---|---|
| Application | Interior use within a dwelling or premises |
| Illustrated design | One narrow horizontal glazed strip near the bottom of a predominantly paneled leaf |
| Leaf construction | MDF frame members with flat HDF panels |
| Vertical members | 40 mm thick; 160 mm wide |
| Glazed elements | 4 mm MAT DRE glass |
| Published leaf height | 2043 mm |
| Swing edge choices | Rebated or non-rebated |
| Rebated hardware | Three silver screw-in hinges; latch lock |
| Non-rebated preparation | Two Estetic 80 hinge pockets; hinges supplied with frame |
| Non-rebated lock | Magnetic; function selected for room |
| Surfaces | DRE-Cell and DRE-3D finish groups |
| Optional sliding system | NS wall-mounted or NT with adjustable tunnel; specify separately |
Reviews
Not sure this is the right solution for your home? Talk to our specialist.
Recently Viewed
Leave your details and our consultant will contact you within one business day.