WIKĘD Procural PE78EI EI60 Exterior Fire-Rated Aluminum Door System

WIKĘD's PROCURAL PE78EI Design Line EI60 is an aluminum door-system option for an exterior opening that requires a documented fire-resistant assembly. Its exterior identity matters: the relevant Declaration of Performance, ALU/EI/ZEW/2021/3, addresses external doors and windows closing wall openings requiring fire resistance, with or without use on escape routes. The declared class is EI2 60 under EN 16034:2014. This is a configuration-dependent selection, so the fire-resistance requirement belongs in the specification alongside the opening dimensions and intended use. A general PE78 family name or a similar-looking glazed door is not enough to establish the same classification. Begin the project with the actual wall opening and the performance needed there, then have the supplier identify the appropriate certified assembly.

Before an order is approved, ask WIKĘD to confirm the current validity of the exterior classification and provide the applicable documentation for the proposed unit. The EI2 60 requirement must be matched to the chosen dimensions, filling, frame, hardware, and self-closing arrangement, with each component inside the documented scope. Where an escape route is involved, its operating hardware also needs to be resolved for that particular use. Provide the project location and the building's requirement so that the supplier can identify the relevant configuration and documents. Have the installer review the wall construction and perimeter connection before the order is finalized. The aim is to approve a complete exterior assembly with the required performance, while keeping decorative changes and equipment substitutions consistent with its classification.

Once the compliant assembly has been established, the aluminum-system design can be coordinated with the surrounding architecture. Discuss the desired amount of glazing, visibility through the opening, surface finish, and relationship to adjacent fixed sections with the supplier, keeping every choice within the documented scope. A change of glass, lock, closer, or frame detail should be checked against the approved configuration before it becomes a design revision. Confirm the wall substrate, threshold, anchoring, and perimeter installation requirements on the project drawing. The closure should be planned as a complete fire-resisting assembly, including the required self-closing equipment and permitted infill, rather than as a decorative leaf selected independently of its components. Comparable prices for another exterior aluminum EI60 system can assist budgeting, but they do not establish this product's exact contents, availability, or certified performance.

Specifications: System: PROCURAL PE78EI Design Line; supplier: WIKĘD; construction: aluminum system; intended application: exterior fire-resistant wall openings. Exterior declaration reference: ALU/EI/ZEW/2021/3; declared fire resistance: EI2 60; standard: EN 16034:2014; self-closing designation: C. Supply only the exact exterior configuration within the applicable classification, including its filling, dimensions, frame, and closing hardware. Current validity and the documentation for the selected assembly must be confirmed with WIKĘD before ordering. Local acceptance, escape-route equipment, smoke-control requirements where applicable, and the complete installation specification require project-specific confirmation. Changes to the approved infill or equipment should be reviewed by the supplier before they become order revisions.