loader

DRE Binito 20 Interior Door

Price: $ 800

  • Free consultation
  • Delivery and certified installation in CT & NY
  • European quality

DRE Binito 20 Interior Door

DRE Binito 20 uses a sequence of fine horizontal lines to give a painted, closed-face interior door a clear sense of proportion. The manufacturer's illustration shows the lines extending across the central part of the leaf, with the door face remaining visually solid between them. This is a different treatment from the collection's glazed designs: the pattern comes from the painted surface rather than from a view through the opening. Four colors are listed, White, Cashmere, Latte and Ash, providing a concise palette for coordinating walls, trim and furniture. The construction is based on an internal MDF perimeter frame with honeycomb filling, finished with UV-cured acrylic paint. Glazing does not appear in the model's standard technical list. In a room with several adjoining doors, Binito 20's repeated horizontal detail can establish a consistent rhythm without adding another woodgrain pattern to the interior. The numbered design stays the same across the available paint and hardware choices, so use the model name as well as the finish when preparing a door schedule.

Horizontal lines on a closed painted face

The edge construction affects the hardware and the relationship between leaf and frame. DRE describes rebated swing construction with two silver-colored screw-in hinges and a latch lock, while a non-rebated swing leaf has preparation for two Estetic 80 concealed hinges and uses magnetic locking. Concealed hinges belong to the chosen frame specification. Ordinary key, bathroom privacy, cylinder and economy lock functions are available to match the use of each room. Consider the handle and lock together so a repeated door design can serve different rooms without an inconsistent hardware appearance. The listed height is 2043 mm, and the nominal width references are accompanied by actual leaf widths. Check those dimensions against the supplier's frame requirements and the finished floor rather than relying on a nominal size alone. A compatible sliding leaf configuration is also listed within the model range, using either the DRE NS wall-mounted system or the NT arrangement with an adjustable tunnel. Plan the wall run and handle clearance before choosing that alternative. The painted leaf, frame and operating hardware form the complete opening, and each should be identified separately when comparing quotations for Binito 20.

ManufacturerDRE
ModelBinito 20
ApplicationInterior room-to-room door
ConstructionBoard construction with MDF perimeter frame
CoreHoneycomb filling
SurfaceUV-cured acrylic painted finish
Finish choicesWhite, Cashmere, Latte or Ash
Leaf height2043 mm
Swing configurationsRebated or non-rebated; reverse-rebate range also listed
Rebated hingesTwo silver-colored screw-in hinges
Non-rebated preparationTwo Estetic 80 concealed hinge pockets; hinges supplied with frame
LocksLatch lock for rebated leaf; magnetic lock for non-rebated leaf
GlazingNo glazing listed in model standard specification
Width references644–1044 mm overall leaf width for nominal 60–100 sizes
Sliding optionDRE NS wall-mounted or NT with adjustable tunnel; separate system

Reviews

5 1 review
5 1
4 0
3 0
2 0
1 0
Write a review
Note: HTML is not translated!

Not sure this is the right solution for your home? Talk to our specialist.